FFT Trigger Pack Upgrade + Wolff Trigger Springs - 3x 922(r)

 INSTALLATION INSTRUCTIONS FOR TRIGGER PACKS

THIS SET COUNTS AS 3 922(r) PARTS and all three components (hammer, trigger, and disconnector) are stamped "USA" or "US."

There are four variants of the Trigger Kit - two variants are offered in NP3 finish, with one variant being without the pliers required to remove the hammer, and the other variant including the pliers.

The other two variants are the same as above, but are not NP3 coated, but instead are black oxide coated. 

All four variants contain three FFT 922(r) Complaint trigger parts, including the premium hammer, premium trigger, premium disconnector, and the FFT / Wolff Gunsprings Trigger Kit Replacement Springs.  

Be sure to select the variant you want from the drop down below, as there are no returns, exchanges, refunds if you mistakenly buy the wrong part - all sales are final when orders are shipped and parts are out the door.

NOTE:

• Be sure to perform safety function checks upon disassembly and reassembly of OEM trigger groups and/or FFT trigger components or any other OEM or aftermarket trigger group parts to ensure proper functionality

• This kit is not 100% guaranteed to be a 'drop in' kit - in some instances slight modifications to the hammer or disconnector might have to be made to ensure proper functionality

• Installation by a professional gunsmith is always recommended 

• Actual pliers may vary as supplies in the US have been very difficult to resource.  Plier quality will be maintained, however, plier tips can break very easily and we neither accept returns or provide warranty on pliers that break

The FFT premium hammer is an upgrade over the OEM hammer, in that all FFT premium hammers are precision-made wire EDM from ground bar stock high-impact premium tool steel. The premium hammer is hardened for a lifetime of use, and is finished off with the tested and proven NP3 coating, or the battle-ready black oxide coating.

The FFT premium disconnector is an upgrade over the OEM disconnector, in that all FFT premium disconnectors are precision-made wire EDM from bar stock tool steel. The premium disconnector is hardened for a lifetime of use, and is finished off with either the NP3 coating or the black coating.

The FFT premium trigger is an upgrade over the OEM trigger, in that all FFT premium triggers are precision-made wire EDM from ground bar stock high-impact tool steel. The premium trigger is hardened for a lifetime of use, and is finished off with the classic NP3 coating or black oxide coating.

The design and process to manufacture the premium trigger and trigger components was undertaken with a great attention to detail to create a product far superior to the OEM piece in form, fit, and function. For instance, use of the trigger pack reduces trigger pull by approximately two pounds, bringing it from an average of 8.25 lbs to 6.25 pounds.

Designed and manufactured by a trigger expert with 30 years of trigger and trigger component manufacturing and assembly experience, both for the nations premier after-market trigger manufacturer, and a leading rifle manufacturer, this upgrade is a must for the serious shotgun operator using compatible shotguns (see list below).

Install and feel the difference.

Also, each individual piece of this set counts as one 922(r) compliant part, giving you three compliant parts.

FIREARMS WE SELL THIS PART FOR:  Original Benelli M4/M1014, Original Benelli M1 Tactical, Original Benelli M2 Tactical, Original Benelli M3 Tactical

💥 BEFORE EMAILING OR CALLING, PLEASE REVIEW ANSWERS TO COMMONLY ASKED QUESTIONS:  

👉🏻 1.  WHAT IS YOUR RETURN POLICY?

ALL SALES ARE FINAL, NO EXCEPTIONS FOR ANY REASON

CLICK HERE FOR MORE INFORMATION

👉🏻 2.  WILL THIS PART WORK ON MY CLONE, OR MY OLD H&K, MY SUPER BLACK EAGLE, OR SOME OTHER GUN?   

MAYBE.  MAYBE NOT.  ALL PURCHASES OF OUR PARTS FOR CLONES, H&K SHOTGUNS, OR OTHER GUNS ARE NON-RETURNABLE IF THEY DO NOT FIT OR WORK ON YOUR GUN.  NO EXCEPTIONS.

CLICK HERE FOR MORE INFORMATION

👉🏻 3.  WHEN WILL MY PACKAGE SHIP?   

WE SHIP ALMOST DAILY WITH OCCASIONAL DELAYS

CLICK HERE FOR MORE INFORMATION

👉🏻 4.  WHAT METHOD OF SHIPPING DO YOU USE?   

WE ONLY USE THE USPS PRIORITY WITH SIGNATURE CONFIRMATION, NO EXCEPTIONS

CLICK HERE FOR MORE INFORMATION

👉🏻 5.  WILL YOU SHIP TO CANADA OR ANYWHERE OUTSIDE OF THE UNITED STATES?   

NO.

CLICK HERE FOR MORE INFORMATION AND YOUR OPTIONS

👉🏻 6.  WHAT IS YOUR WARRANTY POLICY?   

LIFETIME WARRANTY ON ALL FFT PARTS FOR ORIGINAL PURCHASERS, ONLY.

ON NON-FFT PARTS, THOSE MANUFACTURERS HAVE THEIR OWN WARRANTIES

CLICK HER FOR MORE INFORMATION

👉🏻 7.  WHAT IS YOUR CANCELLATION POLICY?

SAME DAY CANCELLATIONS NO FEE TO CANCEL

NEXT DAY OR THEREAFTER CANCELLATIONS 5% FEE TO CANCEL

CANCELLATIONS WHERE WE HAVE ALREADY SHIPPED, BUT YOU HAVE YET TO RECEIVE IT:  NO REFUND ON SHIPPING, 25% OF ENTIRE PURCHASE PRICE NOT REFUNDABLE TO COVER COSTS ASSOCIATED WITH FULFILLING ORDER

👉🏻 7.  WILL THIS PART WORK ON MY 20 GAUGE?

OUR PARTS ARE MADE AND SOLD ONLY FOR 12 GAUGE SHOTGUNS