Benelli M4 Door Breach Tool / Compensator (60097) Review – Fitment, Features & Trulok Adapter Explained
In this post, I break down the Benelli M4 Door Breach Tool / Compensator (Part #60097), one of the most aggressive and visually striking upgrades available for the platform. As the owner of Freedom Fighter Tactical, I walk through the design, functionality, and real-world considerations of this OEM Benelli attachment, including its jagged breaching edge, compensator performance, and compatibility requirements. I also explain why I use a Trulock adapter, what you need to know about threaded barrels and removable chokes, and why availability on these parts can be unpredictable. If you're building out your Benelli M4 or considering tactical upgrades, this guide will help you decide if the 60097 is right for your setup.
LINK TO THE TOOL - 60097 BENELLI M4 TACTICAL DOOR BREACH / COMPENSATOR
See the video on Instagram: INSTAGRAM FFT
Transcript of the above:
Hey folks, Todd here from Freedom Fighter Tactical. Welcome to the latest video. Today I’m talking about the Benelli Door Breach Tool / Compensator unit—part number 60097—with a True Lock adapter setup.
What I’ve got in my hand is the Benelli 60097 door breacher and compensator attachment. You’ll notice right away the aggressive jagged edge on the front—this is designed for breaching, and it’s no joke. It’s sharp, it’s rugged, and it definitely gives the platform a serious tactical edge. It’s a very well-made OEM part from Benelli, and I’ve always been impressed with the build quality.
To mount this properly, I use an adapter from True Lock. I actually had these made because I couldn’t reliably source Benelli’s factory choke adapter. The True Lock solution has worked extremely well for me over the years, and I’ve sold a lot of them.
Now here’s the key point—and this is critical—if you want to run this attachment, your barrel must be threaded on the inside. That means you need a removable choke system. A lot of newer Benelli shotguns are coming with fixed chokes, and that’s going to limit your ability to run accessories like this, or anything else that requires threading.
So if you’re in the market for a new Benelli and you think you might want to run a breacher, compensator, or even a suppressor setup, you need to make sure you’re getting a model with a threaded barrel and removable choke. Otherwise, this type of upgrade just isn’t going to work for you.
As far as aesthetics go, this piece looks incredible on the gun. It gives it a very aggressive, purpose-built look, and a lot of people love that. I’ve sold quite a few of these over the years. I did a limited run in NP3, but I may not do that again—I think the black finish is more than solid.
One thing I always tell people is that availability on these parts is unpredictable. I carry what I can, but there’s no guarantee that Benelli will restock when I reorder. Sometimes it’s a six-month wait, sometimes a year, and sometimes it just doesn’t come back at all.
At the end of the day, this is a really cool part that adds both function and visual appeal to your Benelli M4. Hopefully this gives you a better understanding of what the 60097 is and whether it’s a good fit for your setup.
Take care, and stay safe.