Freedom Fighter Tactical
7 ROUND TITANIUM MAGAZINE TUBE EXTENSION FOR ALL BENELLI M4 SHOTGUNS
Key Data:
- Benelli M4 / M1014 Part Number: 70052
- Get a full seven rounds in your magazine tube extension, instead of five
-
BENELLI MAGAZINE TUBE EXTENSION REMOVAL AND INSTALLATION INSTRUCTIONS (Download the .pdf)
- Easy to install. Remove 5 round tube and false extension, replace with this 7 round tube.
- Capacity: 7 2.75'' shells, or 6 3'' shells. Note: Measuring of shells occurs before shell is 'crimped' (sealed on barrel end of shell). Some shells are longer than others and capacity can vary, even if rear. Full explanation on our YouTube video HERE.
-
Magazine Spring Sold Separately - New Magazine Spring Highly Recommended - CLICK HERE for the exact mag spring you're looking for...
- Wolff Springs are known for increased reliability, and American made with the best spring steel
- Our Full Length Magazine Tube Extensions are Always Marked "USA" or "Made in USA"
- Fits: Only Original, Authentic Benelli M4 / M1014 Shotguns 12 gauge
-
This product is intended to match with both the Black Shotgun and the Titanium Cerakote H20 (Silver-colored) shotgun
- Anodized in an 'Air-Force' grey, which oddly enough matches well enough for both the black shotguns and the silver H20 Titanium Carakote shotguns
- States Prohibited: New Jersey, Massachusetts
- This part counts as one part in helping towards 922(r) compliance
- BENELLI M4 SCHEMATICS
Further reading:
For the serious Benelli M4 enthusiast, FFT offers the full length replacement magazine tube in finished Titanium. The FFT finished Titanium magazine tubes are manufactured with one-piece construction for strength and durability. The full length finished magazine tube is designed to replace the original magazine tube and "limiter" that Benelli installs on every civilian M4 tactical shotgun. Adding this magazine tube changes the magazine capacity on your Benelli M4 from a 5+1 capacity (5 shells in the magazine, one in the receiver) to a 7+1 capacity (7 shells in the magazine, one in the receiver).
The finish FFT uses on the full length Titanium magazine tube is not a painted finished, and instead is a permanent process that is not susceptible to damage in the field with chips and scratches, such as may occur with a painted finish.
All full length finished Titanium magazine tubes are made in the United States, and are therefore compliant with 922(r). For good measure, every magazine tube manufactured by FFT is stamped "Made in USA." In addition, the Titanium magazine tubes are also stamped "Titanium."
The full length finished Titanium magazine tube is made with the finest Titanium that boasts a tensile strength of 130,000 P.S.I. and a hardness of C36 on the Rockwell scale. Furthermore, the Titanium magazine tube weighs in at 152.68 grams, which is considerably less than most all other aftermarket extensions in the marketplace today. To compare, the factory magazine tube and limiter provided on a stock Benelli M4 weighs in at 297.97 grams. Our full length finished Titanium magazine tube is just barely more than half the weight of the original parts!
To achieve 922(r) compliance on your Benelli M4 shotgun, FFT has solved this for you. Simply choose three of any of the following parts to achieve compliance when using the standard stock (four if using the collapsable stock): FFT follower, FFT forend, FFT disconnector, FFT trigger, FFT hammer, any Mesa Tactical Urbino stock. For additional questions and answers about 922(r), please review FFTs page on 922(r).
The full length finished Titanium magazine tube goes great with either of the Titanium tactical charging handles.
Note that the full length finished Titanium magazine tube is not compatible with the Benelli M1, M2, or M3 shotgun.
It is your responsibility to know the laws of your state before ordering and possessing a magazine tube.
FIREARMS WE SELL THIS PART FOR: Original Benelli M4/M1014
CLICK HERE FOR ANSWERS TO MOST COMMONLY ASKED QUESTIONS REGARDING: