Freedom Fighter Tactical
70052 FF Ti - FFT Finished Titanium Full-Length Magazine Tube for Original Benelli M4 Shotguns in Black - 1x 922(r)
70052 FF Ti - FFT Finished Titanium Full-Length Magazine Tube for Original Benelli M4 Shotguns in BLACK - 1x 922(r)
BENELLI M4 MAGAZINE TUBE REMOVAL AND INSTALLATION INSTRUCTIONS
- Magazine spring and followers sold separately.
- The FFT / Wolff M4 full-length high power magazine spring is highly recommended for best results cycling loads.
- This part is an 'Air Force gray' and is NOT truly black. TO BE CLEAR: THIS TUBE IS NOT BLACK. We do not manufacture any true black Titanium parts as you cannot get a good black look with the premium coating we apply to Titanium.
THE FFT/WOLFF HIGH POWERED MAGAZINE SPRING IS ALWAYS RECOMMENDED WHEN ADDING MAGAZINE CAPACITY OVER 5 ROUNDS.
For the serious Benelli M4 enthusiast, FFT offers the full length replacement magazine tube in finished Titanium. The FFT finished Titanium magazine tubes are manufactured with one-piece construction for strength and durability. The full length finished magazine tube is designed to replace the original magazine tube and "limiter" that Benelli installs on every civilian M4 tactical shotgun. Adding this magazine tube changes the magazine capacity on your Benelli M4 from a 5+1 capacity (5 shells in the magazine, one in the receiver) to a 7+1 capacity (7 shells in the magazine, one in the receiver).
The finish FFT uses on the full length Titanium magazine tube is not a painted finished, and instead is a permanent process that is not susceptible to damage in the field with chips and scratches, such as may occur with a painted finish.
All full length finished Titanium magazine tubes are made in the United States, and are therefore compliant with 922(r). For good measure, every magazine tube manufactured by FFT is stamped "Made in USA." In addition, the Titanium magazine tubes are also stamped "Titanium."
The full length finished Titanium magazine tube is made with the finest Titanium that boasts a tensile strength of 130,000 P.S.I. and a hardness of C36 on the Rockwell scale. Furthermore, the Titanium magazine tube weighs in at 152.68 grams, which is considerably less than most all other aftermarket extensions in the marketplace today. To compare, the factory magazine tube and limiter provided on a stock Benelli M4 weighs in at 297.97 grams. Our full length finished Titanium magazine tube is just barely more than half the weight of the original parts!
To achieve 922(r) compliance on your Benelli M4 shotgun, FFT has solved this for you. Simply choose three of any of the following parts to achieve compliance when using the standard stock (four if using the collapsable stock): FFT follower, FFT forend, FFT disconnector, FFT trigger, FFT hammer, any Mesa Tactical Urbino stock. For additional questions and answers about 922(r), please review FFTs page on 922(r).
The full length finished Titanium magazine tube goes great with either of the Titanium tactical charging handles.
Note that the full length finished Titanium magazine tube is not compatible with the Benelli M1, M2, or M3 shotgun.
It is your responsibility to know the laws of your state before ordering and possessing a magazine tube.
NEW JERSEY AND MASSACHUSETTS CUSTOMERS: FFT WILL NOT SHIP TUBES THAT ALLOW FOR A CAPACITY GREATER THAN 5 TO YOUR STATE. WE REALIZE THAT MANY CUSTOMERS IN THESE STATES OFTENTIMES TRAVEL TO ANOTHER STATE FOR HUNTING AND SHOOTING SPORTS, AND WOULD LIKE TO HAVE THE TUBE FOR LEGAL USE IN ANOTHER STATE. THAT'S FINE, IF YOU ARE INTERESTED IN THIS TUBE, SIMPLY SEND IT TO A NEIGHBORING STATE, TO A FRIEND OR RELATIVE. ORDERS SHIPPING TO YOUR STATE WILL BE CANCELED.
FIREARMS WE SELL THIS PART FOR: Original Benelli M4/M1014
💥 BEFORE EMAILING OR CALLING, PLEASE REVIEW ANSWERS TO COMMONLY ASKED QUESTIONS:
👉🏻 1. WHAT IS YOUR RETURN POLICY?
ALL SALES ARE FINAL, NO EXCEPTIONS FOR ANY REASON
CLICK HERE FOR MORE INFORMATION
👉🏻 2. WILL THIS PART WORK ON MY CLONE, OR MY OLD H&K, MY SUPER BLACK EAGLE, OR SOME OTHER GUN?
MAYBE. MAYBE NOT. ALL PURCHASES OF OUR PARTS FOR CLONES, H&K SHOTGUNS, OR OTHER GUNS ARE NON-RETURNABLE IF THEY DO NOT FIT OR WORK ON YOUR GUN. NO EXCEPTIONS.
CLICK HERE FOR MORE INFORMATION
👉🏻 3. WHEN WILL MY PACKAGE SHIP?
WE SHIP ALMOST DAILY WITH OCCASIONAL DELAYS
CLICK HERE FOR MORE INFORMATION
👉🏻 4. WHAT METHOD OF SHIPPING DO YOU USE?
WE ONLY USE THE USPS PRIORITY WITH SIGNATURE CONFIRMATION, NO EXCEPTIONS
CLICK HERE FOR MORE INFORMATION
👉🏻 5. WILL YOU SHIP TO CANADA OR ANYWHERE OUTSIDE OF THE UNITED STATES?
NO.
CLICK HERE FOR MORE INFORMATION AND YOUR OPTIONS
👉🏻 6. WHAT IS YOUR WARRANTY POLICY?
LIFETIME WARRANTY ON ALL FFT PARTS FOR ORIGINAL PURCHASERS, ONLY.
ON NON-FFT PARTS, THOSE MANUFACTURERS HAVE THEIR OWN WARRANTIES
CLICK HER FOR MORE INFORMATION
👉🏻 7. WHAT IS YOUR CANCELLATION POLICY?
SAME DAY CANCELLATIONS NO FEE TO CANCEL
NEXT DAY OR THEREAFTER CANCELLATIONS 5% FEE TO CANCEL
CANCELLATIONS WHERE WE HAVE ALREADY SHIPPED, BUT YOU HAVE YET TO RECEIVE IT: NO REFUND ON SHIPPING, 25% OF ENTIRE PURCHASE PRICE NOT REFUNDABLE TO COVER COSTS ASSOCIATED WITH FULFILLING ORDER
👉🏻 7. WILL THIS PART WORK ON MY 20 GAUGE?
OUR PARTS ARE MADE AND SOLD ONLY FOR 12 GAUGE SHOTGUNS